Introduction to High flow Roots vacuum pump and Roots Blower working principle

High flow Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，Widely used inaquaculture,Material fluidization,material handling,aeration,dehydrate and so on，usually used in pneumatic transport, Food and beverage processing, aquaculture, port, power and other fields，has been favored by more and more customers.。

1、Brief introduction of High flow Roots vacuum pump

High flow Roots vacuum pumpis an efficient volumetric gas conveying and pressurizing equipment.，it is an ideal choice for customers to buy High flow Roots vacuum pump。

High flow Roots vacuum pump

2、High flow Roots vacuum pump real beat

High flow Roots vacuum pump specifications and models, novel design, beautiful appearance, for our customers to visit.。

High flow Roots vacuum pump

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Introduction of advantages of High flow Roots vacuum pump

The advantages of High flow Roots vacuum pump are as follows:

1. Durable performance

The impeller and shaft of the High flow Roots vacuum pump are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

2. energy-efficient

The High flow Roots vacuum pump has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Low noise and vibration

The three-leaf rotor structure of the High flow Roots vacuum pump makes it less vibration and noise. This feature makes the High flow Roots vacuum pump work normally in situations where a quiet environment is needed.

4. energy-efficient

The High flow Roots vacuum pump has high efficiency and can realize gas transportation and pressurization with low energy consumption.

5. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

High flow Roots vacuum pump

4、High flow Roots vacuum pump characteristics

High flow Roots vacuum pumpsmooth operation,economical and durable,low noise,wide application range,be of simple construction，it has the structure of case, bearing, fuel tank, impeller and case，Due to the adoption of synchronous gear transmission and small gap design, the High flow Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the High flow Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High flow Roots vacuum pump less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.，the product looks beautiful.，was developed and designed by hyde powder。

High flow Roots vacuum pump

5、Structural advantages of High flow Roots vacuum pump

The High flow Roots vacuum pump has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the High flow Roots vacuum pump enters and exits.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High flow Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

High flow Roots vacuum pump

6、High flow Roots vacuum pump price concessions

The High flow Roots vacuum pump price is introduced as follows:

1. company strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of High flow Roots vacuum pump. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for High flow Roots vacuum pump will be different.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Brand strength

At present, there are various brands of High flow Roots vacuum pump in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of High flow Roots vacuum pump are different.

4. quality factor

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of High flow Roots vacuum pump is low.

5. Low cost of raw materials

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. hyde powder has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

High flow Roots vacuum pump

High flow Roots vacuum pumpit is mainly composed of fuel tank, rotator, wallboard, muffler and impeller，This productSimple structure and advanced technology.，the advantage is Due to the adoption of synchronous gear transmission and small gap design, the High flow Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the High flow Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High flow Roots vacuum pump perform well in many situations where stable airflow is needed.。