What is a Roots vacuum pump equipment for food packaging? Introduction to the principle of Roots Blower structure

Roots vacuum pump equipment for food packagingis an efficient volumetric gas conveying and pressurizing equipment.，has been favored by more and more customers.。The following is to introduce the Roots vacuum pump equipment for food packaging:

1、Brief introduction of Roots vacuum pump equipment for food packaging

Roots vacuum pump equipment for food packaginga rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，Commonly used insupply air,dehydrate,Material fluidization,cool,Pressurized transportation and so on，it is mainly composed of rotator, fuel tank, rotator, bearing and impeller，at the start of the operation,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is carefully developed by hyde combined with advanced technology。

Roots vacuum pump equipment for food packaging

2、Roots vacuum pump equipment for food packaging display

The omni-directional high-definition real shot of the Roots vacuum pump equipment for food packaging is shown as follows to meet the purchase needs of our customers.。

Roots vacuum pump equipment for food packaging

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Roots vacuum pump equipment for food packaging advantage

The advantages of Roots vacuum pump equipment for food packaging are as follows:

1. energy-efficient

The Roots vacuum pump equipment for food packaging has high efficiency and can realize gas transportation and pressurization with low energy consumption.

2. Smooth operation

In the process of air intake and exhaust, the Roots vacuum pump equipment for food packaging will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.

3. Durable performance

The impeller and shaft of the Roots vacuum pump equipment for food packaging are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Low noise and vibration

The three-leaf rotor structure of the Roots vacuum pump equipment for food packaging makes it less vibration and noise. This feature makes the Roots vacuum pump equipment for food packaging work normally in situations where a quiet environment is needed.

Roots vacuum pump equipment for food packaging

4、Roots vacuum pump equipment for food packaging video

The following is the live video of Roots vacuum pump equipment for food packaging designed and produced by hyde for users, from which we can see the the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Due to the adoption of synchronous gear transmission and small gap design, the Roots vacuum pump equipment for food packaging runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Roots vacuum pump equipment for food packaging runs stably and reliably, without contact and wear parts, and has a long service life. of hydeproduction and processing的Roots vacuum pump equipment for food packaging.。

Roots vacuum pump equipment for food packaging

As you can see from the live video.，hyde powder at work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

5、Roots vacuum pump equipment for food packaging structure composition

The Roots vacuum pump equipment for food packaging structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Roots vacuum pump equipment for food packaging, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots vacuum pump equipment for food packaging has gradually replaced the two-leaf Roots vacuum pump equipment for food packaging.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots vacuum pump equipment for food packaging, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Roots vacuum pump equipment for food packaging

6、How to choose the right product manufacturer?

Choosing a suitable Roots vacuum pump equipment for food packaging manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Roots vacuum pump equipment for food packaging products that meet the demand and have good cost performance.。

hyde powder

Roots vacuum pump equipment for food packagingis a common Roots vacuum pump equipment for food packaging，it has the functions of pick up the suction, dry, pressurized transportation, exhaust emission and supply air，it has the characteristics of strong adaptability, stable and reliable, smooth operation, energy-efficient and convenient manufacture。