What is a Pressurized three-leaf Roots vacuum pump? Introduction to the principle of the roots vacuum pump structure

Pressurized three-leaf Roots vacuum pumpis a common vacuum equipment.，be loved by our customers.。

1、Brief introduction of Pressurized three-leaf Roots vacuum pump

Pressurized three-leaf Roots vacuum pumpis a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.，It has a wide range of uses, and is often used invacuum treatment,vacuum distillation,Gas treatment,vacuum drying,Vacuum extraction and so on，widely used in make paper, power, manufacturing industry, petrochemical industry, power and other fields，the product looks atmospheric.，at runtime,the suction, compression and exhaust processes are completed by synchronous high-speed rotation of two or more trilobal rotors in the pump cavity. The rotor consists of three blades, whose shapes and positions are symmetrical. When the motor is started, the two rotors start to rotate. Due to the symmetry of the design and position of the blades, air enters the pump body from the air inlet, and is gradually squeezed and discharged by the blades, forming a vacuum.。

Pressurized three-leaf Roots vacuum pump

2、Structural advantages of Pressurized three-leaf Roots vacuum pump

The Pressurized three-leaf Roots vacuum pump has the following structure

1. rotator

Rotor is the core component of the Pressurized three-leaf Roots vacuum pump, and its profile design and machining accuracy directly affect the performance and service life of the pump.

2. gearing

The transmission device is usually driven by motor or reducer, which makes the rotor rotate relatively in the pump cavity.

3. sealing device

The sealing device is used to ensure that the gas in the pump cavity will not leak to the external environment.

4. bearing

Bearings are responsible for supporting the rotary motion of the rotor, and high-precision bearings are usually used to ensure the stable operation of the rotor.

5. pump body

Pump body is usually made of cast iron or cast steel, which has good strength and sealing performance.

Pressurized three-leaf Roots vacuum pump

3、Pressurized three-leaf Roots vacuum pump application

Pressurized three-leaf Roots vacuum pumpIt is a product series that integrates vacuum packaging, vacuum treatment, vacuum distillation, vacuum packaging and vacuum drying，the product looks beautiful.，based on the relative motion between the rotors, the gas is sucked from the air inlet through the rotation of the rotors, compressed in the pump cavity, and finally discharged through the air outlet, thus forming a vacuum in the pump cavity.，it has the structure of pump body, bearing, gearing, sealing device and bearing，is a Pressurized three-leaf Roots vacuum pump。

Pressurized three-leaf Roots vacuum pump

4、Pressurized three-leaf Roots vacuum pump customer scene picture

There are many specifications and models of Pressurized three-leaf Roots vacuum pump, which can be selected by users at will. The high-definition factory map is available for our customers to visit.。

Pressurized three-leaf Roots vacuum pump

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Pressurized three-leaf Roots vacuum pump price consultation

The Pressurized three-leaf Roots vacuum pump price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Pressurized three-leaf Roots vacuum pump have more or less differences in price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. Model type

Because there are many models of each product, different customers have different requirements for product performance, and the product specifications and models that are inevitably used will be different. Different models of the same product will lead to different prices.

5. manufacturing cost

hyde powder has a large production scale, strong manufacturing strength and high degree of automation in product production. In such a manufacturing environment, the cost of manufacturing Pressurized three-leaf Roots vacuum pump in hyde powder is greatly reduced.

Pressurized three-leaf Roots vacuum pump

6、hyde powder workshop pictures

The finished products of the Pressurized three-leaf Roots vacuum pump factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde

The finished products of the Pressurized three-leaf Roots vacuum pump factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Pressurized three-leaf Roots vacuum pumpThe overall structural design is relatively simple and compact.，it is mainly composed of pump body, sealing device, rotator, gearing and rotator，features include be of simple construction, Smooth operation, Large volume utilization rate, Economical and durable and easy to operate。