What is a Pneumatic conveying of drug particles? Introduction to the advantages and characteristics of the Powder pneumatic conveying

Pneumatic conveying of drug particlesis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

1、Brief introduction of Pneumatic conveying of drug particles

Pneumatic conveying of drug particlesis an advanced technology for conveying materials by aerodynamic force.。

Pneumatic conveying of drug particles

2、Pneumatic conveying of drug particles video

On-site aerial photography of Pneumatic conveying of drug particles。

Pneumatic conveying of drug particles

As you can see from the live video.，hyde at runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。

3、Pneumatic conveying of drug particles advantage

The advantages of Pneumatic conveying of drug particles are as follows:

1. Structural construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. Low maintenance cost

The Pneumatic conveying of drug particles device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

3. Totally enclosed conveying

The pipeline layout of the Pneumatic conveying of drug particles is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Pneumatic conveying of drug particles system have great adaptability in the renovation and expansion of the factory.

4. Improve conveying efficiency

The Pneumatic conveying of drug particles system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

5. High degree of automation

The Pneumatic conveying of drug particles system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

Pneumatic conveying of drug particles

4、Pneumatic conveying of drug particles use

The purpose of Pneumatic conveying of drug particles is introduced as follows:

1. Reduce pollution

The Pneumatic conveying of drug particles system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Adapt to complex environment

The Pneumatic conveying of drug particles system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying of drug particles pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Bulk material transportation

The Pneumatic conveying of drug particles is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying of drug particles, these materials can be efficiently transferred between different production links or equipment.

4. save energy and cut emissions

Although the Pneumatic conveying of drug particles system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. material handling

Pneumatic conveying of drug particles system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Pneumatic conveying of drug particles

5、Introduction of advantages of Pneumatic conveying of drug particles

Pneumatic conveying of drug particless have the following advantages.

1. Save space

Compared with the traditional mechanical conveying mode, the Pneumatic conveying of drug particles system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

2. Multi-point to multi-point transportation

The Pneumatic conveying of drug particles system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. High degree of automation

The Pneumatic conveying of drug particles system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

4. Flexible layout

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Pneumatic conveying of drug particles system can be seamlessly connected with other production equipment to improve the overall production efficiency.

5. High conveying quality

In the process of conveying, the Pneumatic conveying of drug particles system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

Pneumatic conveying of drug particles

6、Pneumatic conveying of drug particles price consultation

The Pneumatic conveying of drug particles price is introduced as follows:

1. Cost input

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

2. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde powder pays special attention to the hardware configuration of products, so hyde Pneumatic conveying of drug particles has a higher cost performance.

3. market demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Pneumatic conveying of drug particles will fluctuate greatly, and the market changes are various.

4. product model

The same product, different specifications and models, the performance of the product is different, therefore, manufacturers need different costs in producing and manufacturing products, so the prices of different specifications and models are different, and customers should give priority to suitability when purchasing.

5. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Pneumatic conveying of drug particles

Pneumatic conveying of drug particlesit has the characteristics of Low energy consumption, Can make full use of space, Quantitative transportation, Reduce material loss and Save manpower，the product looks atmospheric.。