What is a Pneumatic conveying of stone powder particles? Introduction to the advantages and characteristics of Powder pneumatic conveying functions

Pneumatic conveying of stone powder particlesis a material conveying system that combines jet technology and fluidization technology.，it has the characteristics of Safe and reliable, Large conveying capacity, Good dustproof effect, Convenient maintenance and versatility，widely used in chemical plant, heat-engine plant, metallurgy, plastic, logistics and other fields。

1、Brief introduction of Pneumatic conveying of stone powder particles

Pneumatic conveying of stone powder particlesis a technology to transport solid particulate materials through air flow.，at runtime,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，is designed by hyde with advanced technology。

Pneumatic conveying of stone powder particles

2、Pneumatic conveying of stone powder particles advantage

Pneumatic conveying of stone powder particless have the following advantages.

1. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

2. Small floor space

Compared with the traditional mechanical conveying mode, the Pneumatic conveying of stone powder particles system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

3. Multi-point to multi-point transportation

The Pneumatic conveying of stone powder particles system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Generality

The Pneumatic conveying of stone powder particles system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

5. Low maintenance cost

The Pneumatic conveying of stone powder particles system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

Pneumatic conveying of stone powder particles

3、Introduction of Pneumatic conveying of stone powder particles characteristics

Pneumatic conveying of stone powder particlesFlexible layout,Reliable operation,Stable operation,Easy to automate management,Avoid material pollution，it is an ideal choice for customers to buy Pneumatic conveying of stone powder particles。

Pneumatic conveying of stone powder particles

4、Working principle of Pneumatic conveying of stone powder particles

Pneumatic conveying of stone powder particlesthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes Bunker system, Conveying pipeline system, control system, Air source system and dust pelletizing system，In the process of conveying, various technological operations can be carried out at the same time, such as mix.、In the conveying process, various technological operations can be carried out at the same time.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Materials are transported by closed pipelines.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.。

Pneumatic conveying of stone powder particles

5、Structural advantages of Pneumatic conveying of stone powder particles

The Pneumatic conveying of stone powder particles has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of stone powder particles system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Pneumatic conveying of stone powder particles system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Pneumatic conveying of stone powder particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Pneumatic conveying of stone powder particles

Pneumatic conveying of stone powder particlesthe product looks atmospheric.，It has a wide range of uses, including Long distance transportation, Dust removal and essence, Reduce pollution, material handling and Process assistance。