Introduction to Pneumatic conveying of glass particles and Pneumatic conveying equipment working principle

Pneumatic conveying of glass particlesis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，it has the functions of Closed conveying, Automatic control, material handling, Physical processing assistance and Explosion-proof involves，is a common Pneumatic conveying of glass particles。

1、Brief introduction of Pneumatic conveying of glass particles

Pneumatic conveying of glass particlesis a technology to transport solid particulate materials through air flow.，the main features are Easy to realize automation, High degree of automation, Can carry out long-distance dispersion transportation., Less maintenance. and Convenient for material transportation and recovery.。

Pneumatic conveying of glass particles

2、Pneumatic conveying of glass particles structure

The Pneumatic conveying of glass particles structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Pneumatic conveying of glass particles system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Pneumatic conveying of glass particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Pneumatic conveying of glass particles

3、Working principle of Pneumatic conveying of glass particles

Pneumatic conveying of glass particlesUsing aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。

Pneumatic conveying of glass particles

4、Pneumatic conveying of glass particles function

Pneumatic conveying of glass particlesit has the functions of Environmental protection and pollution-free, Closed conveying, Automatic control, material handling and Physical processing assistance，at runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。

Pneumatic conveying of glass particles

5、Pneumatic conveying of glass particles price

The Pneumatic conveying of glass particles price is introduced as follows:

1. geographical position

The price of Pneumatic conveying of glass particles in jinan, Shandong province is much lower than that in other regions, and hyde powder is a Pneumatic conveying of glass particles direct selling factory not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Pneumatic conveying of glass particles price positioning more reasonable, low-cost and economical.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Pneumatic conveying of glass particles manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Pneumatic conveying of glass particles price can meet the purchasing needs of customers.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Pneumatic conveying of glass particles have more or less differences in price.

4. sales mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Pneumatic conveying of glass particles is low.

5. model

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

Pneumatic conveying of glass particles

6、company strength

The company has many years of Pneumatic conveying of glass particles manufacturing experience, large scale and strong strength.。

hyde

Pneumatic conveying of glass particlesthe main structure includes control system, dust pelletizing system, delivery system, Air source system, control system and so on，is a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，it is widely used inheat-engine plant,logistics,transportation,power,build a ship and other industries。