Introduction to Polyethylene particle transportation, introduction to pneumatic conveying system function advantages and characteristics

Polyethylene particle transportationIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，Closed pipeline transportation，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Not only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、The materials are completely sealed during transportation.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，it is usually composed of control system, Air source system, Bunker system, Air source system and Conveying pipeline system。

1、Brief introduction of Polyethylene particle transportation

Polyethylene particle transportationis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，at the start of the operation,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，was developed and designed by hyde。

Polyethylene particle transportation

2、Polyethylene particle transportation principle

Polyethylene particle transportationin the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，is a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，can be customized according to user's needs.。

Polyethylene particle transportation

3、Polyethylene particle transportation use

The purpose of Polyethylene particle transportation is introduced as follows:

1. Process assistance

In some production processes, Polyethylene particle transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Polyethylene particle transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

2. save energy and cut emissions

Although the Polyethylene particle transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Dust removal and purification

The Polyethylene particle transportation system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Multi-point transportation

The Polyethylene particle transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Long distance transportation

The Polyethylene particle transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Polyethylene particle transportation

4、Polyethylene particle transportation function

Polyethylene particle transportationmultifunctional, with functions such as Environmental protection and pollution-free, Automatic control, Physical processing assistance, Explosion-proof involves and Closed conveying，be loved by our customers.。

Polyethylene particle transportation

5、Polyethylene particle transportation application

Polyethylene particle transportations have the following purposes.

1. Reduce pollution

The Polyethylene particle transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Process assistance

In some production processes, Polyethylene particle transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Polyethylene particle transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

3. save energy and cut emissions

Although the Polyethylene particle transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Multi-point transportation

The Polyethylene particle transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Dust removal and purification

The Polyethylene particle transportation system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Polyethylene particle transportation

6、How much is the Polyethylene particle transportation?

The Polyethylene particle transportation price is introduced as follows:

1. raw material

The quality of material selection is one of the main factors that directly affect the Polyethylene particle transportation. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

2. Brand strength

At present, there are various brands of Polyethylene particle transportation in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Polyethylene particle transportation are different.

3. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. mass discrepancy

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and hyde powder's product quality is guaranteed and the price is cost-effective.

5. Manufacturer's sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

Polyethylene particle transportation

Polyethylene particle transportationit has the characteristics of Centralized transportation, Economic and environmental protection, Easy to use, Easy maintenance and convenient to use，it is widely used ingrain processing,machine building,medicine,pharmaceutical factory,chemical plant and other industries。