What is a Ash pneumatic conveying? Introduction to the principle of Powder pneumatic conveying structure

Ash pneumatic conveyingis an efficient and environment-friendly way to transport materials by using the energy of airflow.，is carefully developed by hyde powder combined with advanced technology。The following is to introduce the Ash pneumatic conveying:

1、Brief introduction of Ash pneumatic conveying

Ash pneumatic conveyingIt uses air energy to continuously convey powder and bulk materials.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，is a Ash pneumatic conveying。

Ash pneumatic conveying

2、Ash pneumatic conveying characteristics

Ash pneumatic conveyingEasy to use,Good dustproof effect,The conveying speed is faster,easy installation,Quantitative transportation。

Ash pneumatic conveying

3、Ash pneumatic conveying HD real picture

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Ash pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Ash pneumatic conveying structure composition

The Ash pneumatic conveying has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Ash pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Ash pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Ash pneumatic conveying

5、Ash pneumatic conveying application

Ash pneumatic conveyings have the following purposes.

1. Long-distance and multipoint transportation

The Ash pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Ash pneumatic conveyings have important application value in large factories and cross-regional material transportation.

2. Long distance transportation

The Ash pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Mixing and classification

In the process of conveying, the Ash pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. Adapt to complex environment

The Ash pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Ash pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. save energy and cut emissions

Although the Ash pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Ash pneumatic conveying

6、How much is the Ash pneumatic conveying?

The Ash pneumatic conveying price is introduced as follows:

1. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Ash pneumatic conveying price and service can meet the actual needs of customers.

2. Manufacturer's strength

hyde is a self-produced and self-sold Ash pneumatic conveying, and has rich experience in the production and manufacturing of Ash pneumatic conveying. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

3. geographical position

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

Ash pneumatic conveying

Ash pneumatic conveyingFully enclosed transportation system, materials are transported in closed pipes.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、PLC intelligent control, high degree of automation and simple operation.、In the conveying process, various technological operations can be carried out at the same time.、Can realize the transportation of materials in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，it has the functions of Explosion-proof involves, Closed conveying, Environmental protection and pollution-free, Physical processing assistance and Automatic control，It has the functions of Mixing and classification, Dust removal and essence, Heating, cooling and drying, Long-distance and multipoint transportation and Reduce pollution。