Introduction to Straw ash conveying and pneumatic conveying system advantages and features

Straw ash conveyingis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，is developed and improved by hyde。

1、Brief introduction of Straw ash conveying

Straw ash conveyingis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，usually used in machine building, building materials, plastic, chemical plant, cast and other fields，Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、The whole conveying process is sealed.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、The materials are completely sealed during transportation.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.，be loved by our customers.。

Straw ash conveying

2、Structural advantages of Straw ash conveying

The Straw ash conveying has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Straw ash conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Straw ash conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Straw ash conveying

3、Straw ash conveying function

Straw ash conveyingit has the functions of Physical processing assistance, Environmental protection and pollution-free, Automatic control, material handling and Explosion-proof involves，is a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，the advantage is Materials collected from several points can be sent to one place or one place to scattered points.、It can be discharged at a single point or at multiple points.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、The material is completely closed in the whole conveying process.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，the product looks beautiful.，is an advanced Straw ash conveying developed by our company in combination with the actual situation of the industry。

Straw ash conveying

4、Straw ash conveying use

The purpose of Straw ash conveying is introduced as follows:

1. Reduce pollution

The Straw ash conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. save energy and cut emissions

Although the Straw ash conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Environmental protection and cleaner production

The Straw ash conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. cut down on energy consumption

Although the power consumption of the Straw ash conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Long-distance and multipoint transportation

The Straw ash conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Straw ash conveyings have important application value in large factories and cross-regional material transportation.

Straw ash conveying

5、Straw ash conveying video live broadcast

You can buy Straw ash conveying according to your needs and show you product videos.。

Straw ash conveying

As you can see from the live video.，hyde powder Not only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、Closed pipeline transportation，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the conveying process, various technological operations can be carried out at the same time.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.。

6、Brief introduction of Straw ash conveying

Straw ash conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，the product looks atmospheric.，is a kind of high quality and low price Straw ash conveying，generally, it is composed of Bunker system, control system, dust pelletizing system, Air source system, control system and other major components，features include No secondary pollution, automation, Operation safety, Flexible pipeline layout and Easy to use。

Straw ash conveying

Straw ash conveyingthe product looks beautiful.，is a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the product looks atmospheric.。