What is a High temperature ash conveying? How much is the price of the Material conveying?

High temperature ash conveyingmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.。The following is to introduce the High temperature ash conveying:

1、Brief introduction of High temperature ash conveying

High temperature ash conveyingby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，Mainly used forEnvironmental protection and cleaner production,Long distance transportation,material handling,Process assistance andReduce pollution，the advantage is Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、The operation mode is flexible and changeable, and it can run continuously or regularly.、The conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the conveying process, various technological operations can be carried out at the same time.，the product looks atmospheric.，at work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.。

High temperature ash conveying

2、Structural advantages of High temperature ash conveying

The High temperature ash conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of High temperature ash conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the High temperature ash conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

High temperature ash conveying

3、High temperature ash conveying HD picture

HD picture of hyde powder High temperature ash conveying,Convenient maintenance。

High temperature ash conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Working principle of High temperature ash conveying

High temperature ash conveyingat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，it is widely used in building material, cast, power, building materials, plastic and other industries，it has the functions of Automatic control, Physical processing assistance, Closed conveying, Environmental protection and pollution-free and material handling，the product looks beautiful.，is a High temperature ash conveying newly developed by hyde。

High temperature ash conveying

5、How much is the High temperature ash conveying?

The High temperature ash conveying price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. model

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

3. Model type

The quotation of the same series of High temperature ash conveying with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

4. cost of production

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the High temperature ash conveying will also be reduced.

5. Manufacturer scale

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of High temperature ash conveying. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for High temperature ash conveying will be different.

High temperature ash conveying

6、hyde powder delivery site

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the High temperature ash conveying production process and production site, and gain favorable comments and recognition from customers.。

High temperature ash conveying

As you can see from the live video.hyde powder multifunctional, with functions such as Closed conveying, Automatic control, Physical processing assistance, Explosion-proof involves and Environmental protection and pollution-free。

High temperature ash conveyingfeatures include Easy maintenance, automation, Economic and environmental protection, Low energy consumption and Various processes，it is widely used ingrain processing,environmental protection,chemical industry,heat-engine plant,chemical plant and other industries，at work,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。