Introduction to Coal slag pneumatic conveying, introduction to pneumatic conveying function advantages and characteristics

Coal slag pneumatic conveyingIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，The price is relatively low.，modern technology。The following is to introduce the Coal slag pneumatic conveying:

1、Brief introduction of Coal slag pneumatic conveying

Coal slag pneumatic conveyingis a method of conveying materials through pipelines by using air flow with a certain speed.，Large conveying capacity,Flexible transmission line,Avoid material pollution,No secondary pollution,Flexible layout，In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、The operation mode is flexible and changeable, and it can run continuously or regularly.、In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.，it has the functions of Explosion-proof involves, Automatic control, Physical processing assistance, material handling and Environmental protection and pollution-free，is a common Coal slag pneumatic conveying。

Coal slag pneumatic conveying

2、Coal slag pneumatic conveying use

The purpose of Coal slag pneumatic conveying is introduced as follows:

1. save energy and cut emissions

Although the Coal slag pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Adapt to complex environment

The Coal slag pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Coal slag pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Bulk material transportation

The Coal slag pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Coal slag pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

4. Environmental protection and cleaner production

The Coal slag pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Multi-point transportation

The Coal slag pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Coal slag pneumatic conveying

3、Coal slag pneumatic conveying structure

The Coal slag pneumatic conveying structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the Coal slag pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Coal slag pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Coal slag pneumatic conveying

4、Working principle of Coal slag pneumatic conveying

Coal slag pneumatic conveyingat the start of the operation,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，It uses air energy to continuously convey powder and bulk materials.，it has been widely used in medicine, build a ship, chemical plant, machine building, power and other industries。

Coal slag pneumatic conveying

5、Coal slag pneumatic conveying HD real picture

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Coal slag pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、How much is the Coal slag pneumatic conveying?

The Coal slag pneumatic conveying price is introduced as follows:

1. cost of production

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. hyde has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

2. company strength

Although there are many manufacturers of products in shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

3. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

Coal slag pneumatic conveying

Coal slag pneumatic conveyingIt can be used for Mixing and classification, Reduce pollution, material handling, Multi-point transportation, Dust removal and essence, Long distance transportation and so on，widely used in logistics, building materials, pharmaceutical factory, heat-engine plant, environmental protection and other fields，It has a wide range of uses, including cut down on energy consumption, Long distance transportation, Reduce pollution, Dust removal and essence and Heating, cooling and drying。