Introduction to Pneumatic conveying of coal ash and slag, how much is the price of the Material conveying?

Pneumatic conveying of coal ash and slagis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，the advantage is Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Multi-point feeding and multi-point discharging are possible.、The materials are completely sealed during transportation.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、PLC intelligent control, high degree of automation and simple operation.，the product looks atmospheric.，The structural design is simple, novel and special.，it is mainly composed of Bunker system, Air source system, delivery system, Conveying pipeline system and dust pelletizing system，in the course of work,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。

1、Brief introduction of Pneumatic conveying of coal ash and slag

Pneumatic conveying of coal ash and slagis a kind of material conveying equipment which combines jet technology and fluidization technology.，was developed and designed by hyde powder。

Pneumatic conveying of coal ash and slag

2、Pneumatic conveying of coal ash and slag advantage

The advantages of Pneumatic conveying of coal ash and slag are as follows:

1. High degree of automation

The Pneumatic conveying of coal ash and slag system is easy to realize automatic control.

2. Strong adaptability

The Pneumatic conveying of coal ash and slag system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Pneumatic conveying of coal ash and slags widely used in many industries.

3. Low maintenance cost

The Pneumatic conveying of coal ash and slag device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

4. Save space

Pneumatic conveying of coal ash and slag equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

5. energy saving and environmental protection

The conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and escaping, reduces environmental pollution, improves the working environment and is conducive to protecting the health of production personnel.

Pneumatic conveying of coal ash and slag

3、Pneumatic conveying of coal ash and slag application

Pneumatic conveying of coal ash and slags have the following purposes.

1. Long-distance and multipoint transportation

The Pneumatic conveying of coal ash and slag system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic conveying of coal ash and slags have important application value in large factories and cross-regional material transportation.

2. Adapt to complex environment

The Pneumatic conveying of coal ash and slag system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying of coal ash and slag pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Pneumatic conveying of coal ash and slag pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. save energy and cut emissions

Although the Pneumatic conveying of coal ash and slag system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Long distance transportation

The Pneumatic conveying of coal ash and slag system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Pneumatic conveying of coal ash and slag

4、Pneumatic conveying of coal ash and slag structure composition

The Pneumatic conveying of coal ash and slag has the following structure

1. control system

The control system is the "brain" of the Pneumatic conveying of coal ash and slag system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of coal ash and slag system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Pneumatic conveying of coal ash and slag system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Pneumatic conveying of coal ash and slag

5、Working principle of Pneumatic conveying of coal ash and slag

Pneumatic conveying of coal ash and slagthe principle is simple.It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，is a popular Pneumatic conveying of coal ash and slag，the product looks beautiful.，multifunctional, with functions such as Explosion-proof involves, Automatic control, Environmental protection and pollution-free, material handling and Explosion-proof involves，widely used in transportation, environmental protection, build a ship, medicine, heat-engine plant and other fields。

Pneumatic conveying of coal ash and slag

6、On-site real shot of Pneumatic conveying of coal ash and slag

Various combinations of Pneumatic conveying of coal ash and slag can meet the diverse needs of customers. The following are High definition shooting andthe product looks beautiful., which are trustworthy.。

Pneumatic conveying of coal ash and slag

Note: All the pictures in this article were taken by hyde manufacturer.。

Pneumatic conveying of coal ash and slagIn the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Remote operation can be carried out from several points to one place or from one place to several points.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、Closed pipeline transportation，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.，the main structure includes Bunker system, control system, Air source system, delivery system, Conveying pipeline system and so on，This productThe structural design is more advanced and reasonable.。