What is a Pneumatic conveying of stone powder? Introduction to the advantages and characteristics of Pneumatic conveying equipment functions

Pneumatic conveying of stone powderIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The operation mode is flexible and changeable, and it can run continuously or regularly.、The conveying system is closed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.，It has a wide range of uses, including Long-distance and multipoint transportation, Mixing and classification, Long distance transportation, Environmental protection and cleaner production and Heating, cooling and drying。The following is to introduce the Pneumatic conveying of stone powder:

1、Brief introduction of Pneumatic conveying of stone powder

Pneumatic conveying of stone powderis a method of conveying materials through pipelines by using air flow with a certain speed.，the main structure includes control system, delivery system, Bunker system, Conveying pipeline system, Air source system and so on。

Pneumatic conveying of stone powder

2、Pneumatic conveying of stone powder real beat

High-definition pictures of various types of Pneumatic conveying of stone powder are displayed for customers who are about to buy. Please submit a telephone appointment for physical inspection.。

Pneumatic conveying of stone powder

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Pneumatic conveying of stone powder principle

Pneumatic conveying of stone powderat the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，support customization。

Pneumatic conveying of stone powder

4、Introduction of advantages of Pneumatic conveying of stone powder

The advantages of Pneumatic conveying of stone powder are as follows:

1. Improve conveying efficiency

The continuity and high efficiency of the Pneumatic conveying of stone powder enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

2. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Pneumatic conveying of stone powder.

3. Environmental protection and pollution-free

The whole process of the Pneumatic conveying of stone powder system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

4. versatility

While conveying materials, the Pneumatic conveying of stone powder system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. Save space

Pneumatic conveying of stone powder equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

Pneumatic conveying of stone powder

5、Structural characteristics of Pneumatic conveying of stone powder

The Pneumatic conveying of stone powder structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of stone powder system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Air source device

The air source device is the power core of the Pneumatic conveying of stone powder system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying of stone powder

6、Company discount

Pneumatic conveying of stone powder is a new type of Pneumatic conveying equipment introduced by Shandong Haide Fenti Engineering Co., Ltd. manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for pharmaceutical factory and other industries. Now consult Pneumatic conveying of stone powder, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde

Pneumatic conveying of stone powderthe main structure includes control system, Air source system, Conveying pipeline system, dust pelletizing system and Bunker system，by forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，the product looks atmospheric.。