Introduction to Iron oxide powder transportation, introduction to Pneumatic conveying equipment advantages and characteristics

Iron oxide powder transportationis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the advantage is Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、Materials are transported by closed pipelines.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.，support customization。The following is to introduce the Iron oxide powder transportation:

1、Brief introduction of Iron oxide powder transportation

Iron oxide powder transportationis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，The structural design is simple, novel and special.，it is mainly composed of delivery system, Air source system, Bunker system, dust pelletizing system and control system。

Iron oxide powder transportation

2、Iron oxide powder transportation use

The purpose of Iron oxide powder transportation is introduced as follows:

1. Environmental protection and cleaner production

The Iron oxide powder transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

2. Multi-point transportation

The Iron oxide powder transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Bulk material transportation

The Iron oxide powder transportation is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Iron oxide powder transportation, these materials can be efficiently transferred between different production links or equipment.

4. Reduce pollution

The Iron oxide powder transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. save energy and cut emissions

Although the Iron oxide powder transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Iron oxide powder transportation

3、Structural advantages of Iron oxide powder transportation

The Iron oxide powder transportation structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Iron oxide powder transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Iron oxide powder transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Iron oxide powder transportation

4、Iron oxide powder transportation HD real shot

Provide high-definition Iron oxide powder transportation real shot, a variety of specifications and models for customers to visit.。

Iron oxide powder transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Iron oxide powder transportation working site

On-site aerial photography of Iron oxide powder transportation。

Iron oxide powder transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a common Iron oxide powder transportation。

6、How much is the Iron oxide powder transportation?

The Iron oxide powder transportation price is introduced as follows:

1. Manufacturer's strength

hyde is a self-produced and self-sold Iron oxide powder transportation, and has rich experience in the production and manufacturing of Iron oxide powder transportation. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Brand strength

At present, there are various brands of Iron oxide powder transportation in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Iron oxide powder transportation are different.

4. market factors

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Iron oxide powder transportation price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

5. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

Iron oxide powder transportation

Iron oxide powder transportationis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，the product looks beautiful.。