Introduction to Pneumatic conveying in electronic factories, advantages, characteristics and principles of Pneumatic conveying equipment

Pneumatic conveying in electronic factoriesis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，is a Pneumatic conveying in electronic factories，Easy to use,High conveying efficiency,automation,The conveying speed is faster,Centralized transportation。

1、Brief introduction of Pneumatic conveying in electronic factories

Pneumatic conveying in electronic factoriesis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、Can realize the transportation of materials in a closed pipeline.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、The conveying system is closed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.，is based on hyde powder is a Pneumatic conveying in electronic factories newly developed by hyde。

Pneumatic conveying in electronic factories

2、Pneumatic conveying in electronic factories use

The purpose of Pneumatic conveying in electronic factories is introduced as follows:

1. Multi-point transportation

The Pneumatic conveying in electronic factories system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. material handling

Pneumatic conveying in electronic factories system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Bulk material transportation

The Pneumatic conveying in electronic factories is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying in electronic factories, these materials can be efficiently transferred between different production links or equipment.

4. Environmental protection and cleaner production

The Pneumatic conveying in electronic factories process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Long distance transportation

The Pneumatic conveying in electronic factories system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Pneumatic conveying in electronic factories

3、Pneumatic conveying in electronic factories performance advantage

The advantages of Pneumatic conveying in electronic factories are as follows:

1. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Pneumatic conveying in electronic factories.

2. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. Convenient maintenance and easy automation.

The Pneumatic conveying in electronic factories system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

4. Environmental protection and pollution-free

In the process of Pneumatic conveying in electronic factories opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. The quality of convey materials is ensure.

In the process of conveying, the Pneumatic conveying in electronic factories can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

Pneumatic conveying in electronic factories

4、Pneumatic conveying in electronic factories real shot picture

Take a look at the beautiful pictures of the Pneumatic conveying in electronic factories, showing the product style.。

Pneumatic conveying in electronic factories

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Working principle of Pneumatic conveying in electronic factories

Pneumatic conveying in electronic factoriesthe principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，It has the functions of Reduce pollution, Long-distance and multipoint transportation, material handling, Mixing and classification and Process assistance，be loved by our customers.。

Pneumatic conveying in electronic factories

6、Pneumatic conveying in electronic factories price advantage

The Pneumatic conveying in electronic factories price is introduced as follows:

1. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde pays special attention to the hardware configuration of products, so hyde powder Pneumatic conveying in electronic factories has a higher cost performance.

2. quality factor

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

3. Model specification

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

Pneumatic conveying in electronic factories

Pneumatic conveying in electronic factoriesin the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，it has been widely used in pharmaceutical factory, machine building, metallurgy, heat-engine plant, logistics and other industries。