What is a Particle powder pneumatic conveying? pneumatic conveying specifications, models, and parameters

Particle powder pneumatic conveyingis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，is a popular Particle powder pneumatic conveying，The price is more affordable。

1、Brief introduction of Particle powder pneumatic conveying

Particle powder pneumatic conveyingby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，the product looks atmospheric.，the main features are Fast conveying speed, Quantitative transportation, Easy to realize automation, Wide range of conveying materials and Can make full use of space，has been favored by more and more customers.。

Particle powder pneumatic conveying

2、Particle powder pneumatic conveying advantage

The advantages of Particle powder pneumatic conveying are as follows:

1. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. Strong sealing

The Particle powder pneumatic conveying is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

3. Small floor space

Particle powder pneumatic conveying equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. High degree of automation

The Particle powder pneumatic conveying system is easy to realize automatic control.

5. Convenient maintenance and easy automation.

Although the initial investment of Particle powder pneumatic conveying system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

Particle powder pneumatic conveying

3、Particle powder pneumatic conveying structure

The Particle powder pneumatic conveying structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Particle powder pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Particle powder pneumatic conveying

4、Particle powder pneumatic conveying characteristics

Particle powder pneumatic conveyingfeatures include It is convenient to realize mechanization, Various processes, High conveying efficiency, The failure rate is low and Flexible layout，It has the functions of cut down on energy consumption, Long distance transportation, Reduce pollution, Multi-point transportation and Mixing and classification。

Particle powder pneumatic conveying

5、Advantages of Particle powder pneumatic conveying principle

Particle powder pneumatic conveyingat the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，the advantage is High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、Fully enclosed transportation system, materials are transported in closed pipes.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，generally, it is composed of control system, Conveying pipeline system, dust pelletizing system, Bunker system, control system and other major components，productThe overall structural design is simple, diverse and beautiful.。

Particle powder pneumatic conveying

6、Particle powder pneumatic conveying price

The Particle powder pneumatic conveying price is introduced as follows:

1. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. marketing channel

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

3. market supply and demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Particle powder pneumatic conveying. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

4. manufacturing cost

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

5. Brand strength

At present, there are various brands of Particle powder pneumatic conveying in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Particle powder pneumatic conveying are different.

Particle powder pneumatic conveying

Particle powder pneumatic conveyingthat is, the technology of conveying granular materials in closed pipes by air flow.，the product looks atmospheric.。