Introduction to Fly ash pneumatic conveying equipment and Powder pneumatic conveying structure principle

Fly ash pneumatic conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，at runtime,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，is a common Fly ash pneumatic conveying equipment，the advantage is Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、In the conveying process, various technological operations can be carried out at the same time.、Can realize the transportation of materials in a closed pipeline.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，the product looks atmospheric.。

1、Brief introduction of Fly ash pneumatic conveying equipment

Fly ash pneumatic conveying equipmentis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，it has the characteristics of Flexible transmission line, High degree of automation, Good dustproof effect, energy saving and environmental protection and Simple operation，It is a product series that integrates Heating, cooling and drying, Long distance transportation, Reduce pollution, cut down on energy consumption and material handling，was developed and designed by hyde。

Fly ash pneumatic conveying equipment

2、Introduction of advantages of Fly ash pneumatic conveying equipment

Fly ash pneumatic conveying equipments have the following advantages.

1. Multi-point to multi-point transportation

The Fly ash pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. High degree of automation

The Fly ash pneumatic conveying equipment system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

3. Various process operations can be realized.

While conveying materials, the Fly ash pneumatic conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

4. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Fly ash pneumatic conveying equipment.

5. Convenient maintenance and easy automation.

The Fly ash pneumatic conveying equipment system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

Fly ash pneumatic conveying equipment

3、Introduction of Fly ash pneumatic conveying equipment characteristics

Fly ash pneumatic conveying equipmentfeatures include Long conveying distance, versatility, Safe and reliable, omniseal and High conveying efficiency，In the process of conveying, various technological operations can be carried out at the same time, such as mix.、Fully enclosed transportation system, materials are transported in closed pipes.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as grade.，the product looks beautiful.，the main structure includes Bunker system, delivery system, dust pelletizing system, Conveying pipeline system, control system and so on，Mainly used forEnvironmental protection and cleaner production,Process assistance,Long-distance and multipoint transportation,Bulk material transportation andMixing and classification。

Fly ash pneumatic conveying equipment

4、Fly ash pneumatic conveying equipment application

Fly ash pneumatic conveying equipments have the following purposes.

1. Long-distance and multipoint transportation

The Fly ash pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Fly ash pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

2. Dust removal and purification

The Fly ash pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. save energy and cut emissions

Although the Fly ash pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Reduce pollution

The Fly ash pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. material handling

Fly ash pneumatic conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Fly ash pneumatic conveying equipment

5、Structural advantages of Fly ash pneumatic conveying equipment

The Fly ash pneumatic conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Fly ash pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Fly ash pneumatic conveying equipment

6、hyde powder's strength

The company has many years of Fly ash pneumatic conveying equipment manufacturing experience, large scale and strong strength.。

hyde

Fly ash pneumatic conveying equipmentthe product looks atmospheric.，is a kind of high quality and low price Fly ash pneumatic conveying equipment。