Introduction to blower, advantages, characteristics and principles of blower

blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，at runtime,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，It is a product series that integrates Desulfurization oxidation, sewage disposal, aquaculture, Ventilation and aquaculture，customizable。

1、Brief introduction of blower

bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the advantage is In the process of air intake and exhaust, the blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the blower has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the blower runs stably and reliably, without contact and wear parts, and has a long service life.，multifunctional, with functions such as dry, cool, pressurized transportation, pick up the suction and mix，the main structure includes muffler, impeller, fuel tank, case, bearing and so on，modern technology。

blower

2、Working principle of blower

blowerin the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，is a common blower，it has been widely used in building materials, manufacturing industry, Environmental protection industry, aquaculture, Flue gas treatment and other industries，is based on hyde is a kind of blower manufactured by hyde powder。

blower

3、blower work site real shot

blower picture at a glance, showing elegance.。

blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、blower structure composition

The blower has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the blower enters and exits.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

blower

5、blower function

blowermultifunctional, with functions such as sewage disposal, material handling, exhaust emission, aquaculture and desulfurization oxidation，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the blower less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the blower has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

blower

blowerstructure mainly includes: wallboard, rotator, muffler, rotator, bearing and so on，This blowerSimple structure and advanced technology.，the product looks atmospheric.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the blower less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.。