Introduction to High pressure water-cooled Roots blower and Three leaf Roots blower working principle

High pressure water-cooled Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is a common High pressure water-cooled Roots blower，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High pressure water-cooled Roots blower less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High pressure water-cooled Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes case, fuel tank, wallboard, rotator and muffler，it is an ideal choice for customers to buy High pressure water-cooled Roots blower。

1、Brief introduction of High pressure water-cooled Roots blower

High pressure water-cooled Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，Widely used inmaterial handling,pick up the suction,supply air,dry,dehydrate and so on，it is widely used in make paper, smelt, building materials, port and power，at the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it has the characteristics of stable and reliable, strong adaptability, wide application range, smooth operation and durable performance。

High pressure water-cooled Roots blower

2、Functional advantages of High pressure water-cooled Roots blower

High pressure water-cooled Roots blowers have the following advantages.

1. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

2. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

3. energy-efficient

The High pressure water-cooled Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. Long service life

The mechanical friction of the High pressure water-cooled Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Compact structure and small floor space.

The High pressure water-cooled Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

High pressure water-cooled Roots blower

3、Video analysis of High pressure water-cooled Roots blower

The following is the live video of High pressure water-cooled Roots blower designed and produced by hyde powder for users, from which we can see the The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the High pressure water-cooled Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High pressure water-cooled Roots blower less vibration and noise. of hydeHigh pressure water-cooled Roots blower.。

High pressure water-cooled Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is an efficient volumetric gas conveying and pressurizing equipment.。

4、High pressure water-cooled Roots blower work site real shot

hyde powder High pressure water-cooled Roots blowerthe product looks beautiful., the picture is taken.。

High pressure water-cooled Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

5、How much is the High pressure water-cooled Roots blower?

The High pressure water-cooled Roots blower price is introduced as follows:

1. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Manufacturer's sales model

If there is no middleman to earn the difference, then the High pressure water-cooled Roots blower price will naturally decrease. hyde powder adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

5. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

High pressure water-cooled Roots blower

6、hyde powder company service

Perfect after-sales service is hyde's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as High pressure water-cooled Roots blower price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

hyde powder

High pressure water-cooled Roots blowerthe product looks atmospheric.，is a High pressure water-cooled Roots blower。