Introduction to High pressure water-cooled three blade Roots blower, Roots Blower advantages, characteristics and principles

High pressure water-cooled three blade Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，customizable。The following is to introduce the High pressure water-cooled three blade Roots blower:

1、Brief introduction of High pressure water-cooled three blade Roots blower

High pressure water-cooled three blade Roots blowerthe models are complete and can meet the needs of different users for different purposes.，the product looks atmospheric.，multifunctional, with functions such as pick up the suction, dehydrate, dry, supply air and exhaust emission。

High pressure water-cooled three blade Roots blower

2、Advantages of High pressure water-cooled three blade Roots blower principle

High pressure water-cooled three blade Roots blowerat work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。

High pressure water-cooled three blade Roots blower

3、Introduction of High pressure water-cooled three blade Roots blower characteristics

High pressure water-cooled three blade Roots blowereconomical and durable,be of simple construction,Precise control,low noise,smooth operation，it has the functions of aeration, material fluidization, pressurized transportation, mix and ventilation，it has the structure of impeller, fuel tank, rotator, case and bearing。

High pressure water-cooled three blade Roots blower

4、High pressure water-cooled three blade Roots blower structure composition

The High pressure water-cooled three blade Roots blower has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the High pressure water-cooled three blade Roots blower enters and exits.

2. impeller

It is the rotating part of the High pressure water-cooled three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf High pressure water-cooled three blade Roots blower has gradually replaced the two-leaf High pressure water-cooled three blade Roots blower.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

High pressure water-cooled three blade Roots blower

5、High pressure water-cooled three blade Roots blower performance advantage

The advantages of High pressure water-cooled three blade Roots blower are as follows:

1. Stable and reliable

Due to the adoption of synchronous gear transmission and small gap design, the High pressure water-cooled three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.

2. Convenient maintenance

The structure of the High pressure water-cooled three blade Roots blower is relatively simple and easy to maintain.

3. Durable performance

The impeller and shaft of the High pressure water-cooled three blade Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

High pressure water-cooled three blade Roots blower

6、hyde delivery site

The following is the live video of High pressure water-cooled three blade Roots blower designed and produced by hyde powder for users, from which we can see the the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the High pressure water-cooled three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the High pressure water-cooled three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High pressure water-cooled three blade Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation. of hyde powderHigh pressure water-cooled three blade Roots blower.。

High pressure water-cooled three blade Roots blower

As you can see from the live video.hyde is a kind of high quality and low price High pressure water-cooled three blade Roots blower。

High pressure water-cooled three blade Roots blowerthe advantage is In the process of air intake and exhaust, the High pressure water-cooled three blade Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the High pressure water-cooled three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Because of the design of three-blade rotor, the High pressure water-cooled three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，widely used in chemical fertilizer, sewage disposal, Textile light textile, building materials, smelt and other fields，the principle is simple.It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.。