What is a Aeration and oxygenation three leaf Roots blower? Introduction to the advantages and characteristics of the blower

Aeration and oxygenation three leaf Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

1、Brief introduction of Aeration and oxygenation three leaf Roots blower

Aeration and oxygenation three leaf Roots blowerthe models are complete and can meet the needs of different users for different purposes.，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Aeration and oxygenation three leaf Roots blower less vibration and noise.、Because of the design of three-blade rotor, the Aeration and oxygenation three leaf Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，it has the characteristics of be of simple construction, convenient maintenance, economical and durable, low noise and energy-efficient，is based on hyde is carefully developed by hyde combined with advanced technology。

Aeration and oxygenation three leaf Roots blower

2、Structural advantages of Aeration and oxygenation three leaf Roots blower

The Aeration and oxygenation three leaf Roots blower has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Aeration and oxygenation three leaf Roots blower enters and exits.

5. impeller

It is the rotating part of the Aeration and oxygenation three leaf Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Aeration and oxygenation three leaf Roots blower has gradually replaced the two-leaf Aeration and oxygenation three leaf Roots blower.

Aeration and oxygenation three leaf Roots blower

3、Aeration and oxygenation three leaf Roots blower introduction video

You can buy Aeration and oxygenation three leaf Roots blower according to your needs and show you product videos.。

Aeration and oxygenation three leaf Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. low noise,convenient manufacture,wide application range,durable performance,Precise control。

4、Aeration and oxygenation three leaf Roots blower HD picture

High-definition pictures of various types of Aeration and oxygenation three leaf Roots blower are displayed for customers who are about to buy. Please submit a telephone appointment for physical inspection.。

Aeration and oxygenation three leaf Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Introduction of Aeration and oxygenation three leaf Roots blower characteristics

Aeration and oxygenation three leaf Roots blowerthe main features are be of simple construction, economical and durable, convenient maintenance, wide application range and energy-efficient，is an efficient volumetric gas conveying and pressurizing equipment.，The structural design is simple, novel and special.，it is usually composed of muffler, rotator, wallboard, fuel tank and bearing，the product looks beautiful.，reliable quality。

Aeration and oxygenation three leaf Roots blower

6、Structural characteristics of Aeration and oxygenation three leaf Roots blower

The Aeration and oxygenation three leaf Roots blower structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Aeration and oxygenation three leaf Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Aeration and oxygenation three leaf Roots blower enters and exits.

Aeration and oxygenation three leaf Roots blower

Aeration and oxygenation three leaf Roots blowerthe product looks atmospheric.，It has the functions of Material fluidization, dehydrate, exhaust emission, pick up the suction and material handling。