What is a Blast aeration Roots blower? Three leaf Roots blower specifications, models, and parameters

Blast aeration Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，structure mainly includes: wallboard, fuel tank, case, impeller, muffler and so on，Blast aeration Roots blowerThe overall structural design is simple, diverse and beautiful.。

1、Brief introduction of Blast aeration Roots blower

Blast aeration Roots bloweris a positive displacement blower with forced gas transmission characteristics.，It has a wide range of uses, and is often used inDesulfurization oxidation,Desulfurization oxidation,exhaust emission,Ventilation,cool and so on，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。

Blast aeration Roots blower

2、Blast aeration Roots blower real shot picture

Blast aeration Roots blower HD real shot, showing the product style.。

Blast aeration Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Blast aeration Roots blower structure composition

The Blast aeration Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. impeller

It is the rotating part of the Blast aeration Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Blast aeration Roots blower has gradually replaced the two-leaf Blast aeration Roots blower.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Blast aeration Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Blast aeration Roots blower enters and exits.

Blast aeration Roots blower

4、Blast aeration Roots blower application

Blast aeration Roots blowerIt is a product series that integrates dehydrate, dry, aeration, Material fluidization and material handling，at work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it has the characteristics of smooth operation, stable and reliable, run smoothly, strong adaptability and Precise control，multifunctional, with functions such as supply air, cool, material handling, pick up the suction and desulfurization oxidation，it is widely used in Textile light textile, make paper, building materials, Food and beverage processing and coal chemical industry。

Blast aeration Roots blower

5、Blast aeration Roots blower function

Blast aeration Roots blowermultifunctional, with functions such as sewage disposal, exhaust emission, aquaculture, pressurized transportation and dry，it is mainly composed of rotator, bearing, case, rotator and wallboard，Commonly used insewage disposal,pick up the suction,mix,Pressurized transportation,supply air and so on，support customization。

Blast aeration Roots blower

Blast aeration Roots blowerthe advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Blast aeration Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Blast aeration Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Blast aeration Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，is a positive displacement blower.。