Introduction to Three leaf Roots blower for material return, introduction to Roots Blower advantages and characteristics

Three leaf Roots blower for material returnthe models are complete and can meet the needs of different users for different purposes.，it has the characteristics of stable and reliable, convenient maintenance, durable performance, wide application range and strong adaptability，It is a product series that integrates cool, Ventilation, Desulfurization oxidation, exhaust emission and supply air。The following is to introduce the Three leaf Roots blower for material return:

1、Brief introduction of Three leaf Roots blower for material return

Three leaf Roots blower for material returna rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，The overall structural design is relatively simple，generally, it is composed of bearing, case, wallboard, impeller, fuel tank and other major components，is a Three leaf Roots blower for material return，has been favored by more and more customers.。

Three leaf Roots blower for material return

2、Three leaf Roots blower for material return video live broadcast

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Three leaf Roots blower for material returnt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Three leaf Roots blower for material return

As you can see from the live video.，hyde powder It has a wide range of uses, including cool, dry, exhaust emission, pick up the suction and aquaculture。

3、Three leaf Roots blower for material return structure composition

The Three leaf Roots blower for material return has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. impeller

It is the rotating part of the Three leaf Roots blower for material return, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for material return has gradually replaced the two-leaf Three leaf Roots blower for material return.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots blower for material return, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Three leaf Roots blower for material return

4、Three leaf Roots blower for material return use

Three leaf Roots blower for material returnIt can be used for Ventilation, Desulfurization oxidation, Pressurized transportation, mix, sewage disposal, aeration and so on，the principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，smooth operation,low noise,energy-efficient,economical and durable,wide application range。

Three leaf Roots blower for material return

5、Three leaf Roots blower for material return application

Three leaf Roots blower for material returnMainly used fordehydrate,material handling,Material fluidization,supply air andsewage disposal，it has the functions of desulfurization oxidation, cool, supply air, pick up the suction and material fluidization。

Three leaf Roots blower for material return

Three leaf Roots blower for material returnis a positive displacement blower with forced gas transmission characteristics.，the advantage is The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for material return perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Three leaf Roots blower for material return has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。