What is a Printing factory Roots blower? Introduction to the advantages and characteristics of blower functions

Printing factory Roots bloweris a positive displacement blower.，It is a product series that integrates Pressurized transportation, Desulfurization oxidation, material handling, dehydrate and Material fluidization，multifunctional, with functions such as material handling, aeration, pick up the suction, mix and sewage disposal，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the Printing factory Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Printing factory Roots blower less vibration and noise.，is a common Printing factory Roots blower。

1、Brief introduction of Printing factory Roots blower

Printing factory Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，customizable。

Printing factory Roots blower

2、Printing factory Roots blower use

Printing factory Roots blowerIt can be used for cool, mix, pick up the suction, supply air, exhaust emission, dry and so on，is a kind of high quality and low price Printing factory Roots blower。

Printing factory Roots blower

3、Structural characteristics of Printing factory Roots blower

The Printing factory Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Printing factory Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Printing factory Roots blower has gradually replaced the two-leaf Printing factory Roots blower.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Printing factory Roots blower

4、Printing factory Roots blower performance advantage

Printing factory Roots blowers have the following advantages.

1. Compact structure and small floor space.

The Printing factory Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

2. energy-efficient

The Printing factory Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Long service life

The mechanical friction of the Printing factory Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

4. Durable performance

The impeller and shaft of the Printing factory Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

5. Run smoothly

Due to the design of three-blade rotor, the Printing factory Roots blower has little vibration and low noise during operation, and the operation is stable and reliable.

Printing factory Roots blower

5、Printing factory Roots blower function

Printing factory Roots blowermultifunctional, with functions such as pick up the suction, aeration, mix, supply air and dehydrate，it is widely used in pottery and porcelain, petrochemical industry, building materials, Dust removal and chemical fertilizer。

Printing factory Roots blower

6、Printing factory Roots blower structure composition

The Printing factory Roots blower has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Printing factory Roots blower enters and exits.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Printing factory Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. impeller

It is the rotating part of the Printing factory Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Printing factory Roots blower has gradually replaced the two-leaf Printing factory Roots blower.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Printing factory Roots blower

Printing factory Roots blowerit has been widely used in coal chemical industry, Food and beverage processing, aquaculture, port, sewage disposal and other industries，it has the characteristics of run smoothly, convenient manufacture, stable and reliable, be of simple construction and wide application range。