Introduction to 304 stainless steel three leaf Roots vacuum pump and blower advantages and features

304 stainless steel three leaf Roots vacuum pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，Commonly used inmaterial handling,aquaculture,Pressurized transportation,aeration,dehydrate and so on，the principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，it can be used in coal chemical industry, Environmental protection industry, make paper, Flue gas treatment, pneumatic transport and other industries，is a common 304 stainless steel three leaf Roots vacuum pump。The following is to introduce the 304 stainless steel three leaf Roots vacuum pump:

1、Brief introduction of 304 stainless steel three leaf Roots vacuum pump

304 stainless steel three leaf Roots vacuum pumpis an efficient volumetric gas conveying and pressurizing equipment.。

304 stainless steel three leaf Roots vacuum pump

2、304 stainless steel three leaf Roots vacuum pump structure composition

The 304 stainless steel three leaf Roots vacuum pump has the following structure

1. impeller

It is the rotating part of the 304 stainless steel three leaf Roots vacuum pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf 304 stainless steel three leaf Roots vacuum pump has gradually replaced the two-leaf 304 stainless steel three leaf Roots vacuum pump.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. impeller

It is the rotating part of the 304 stainless steel three leaf Roots vacuum pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf 304 stainless steel three leaf Roots vacuum pump has gradually replaced the two-leaf 304 stainless steel three leaf Roots vacuum pump.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the 304 stainless steel three leaf Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

304 stainless steel three leaf Roots vacuum pump

3、304 stainless steel three leaf Roots vacuum pump video detail

Speak directly with facts on the spot。

304 stainless steel three leaf Roots vacuum pump

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. multifunctional, with functions such as dehydrate, material fluidization, supply air, material handling and mix。

4、Advantages of 304 stainless steel three leaf Roots vacuum pump principle

304 stainless steel three leaf Roots vacuum pumpat the start of the operation,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the main structure includes bearing, fuel tank, wallboard, rotator, case and so on，304 stainless steel three leaf Roots vacuum pumpThe overall structural design is simple, diverse and beautiful.，it has the functions of pressurized transportation, desulfurization oxidation, pick up the suction, ventilation and aeration。

304 stainless steel three leaf Roots vacuum pump

5、304 stainless steel three leaf Roots vacuum pump use

304 stainless steel three leaf Roots vacuum pumpIt can be used for dry, Desulfurization oxidation, aquaculture, sewage disposal, Pressurized transportation, dehydrate and so on，it is usually composed of muffler, impeller, bearing, rotator and fuel tank。

304 stainless steel three leaf Roots vacuum pump

304 stainless steel three leaf Roots vacuum pumpis a kind of high quality and low price 304 stainless steel three leaf Roots vacuum pump，it has the structure of rotator, case, muffler, fuel tank and wallboard，it is widely used in Environmental protection industry, chemical fertilizer, mine, petrify, Dust removal and other industries。