Introduction to Single tank Roots blower, blower advantages, characteristics and principles

Single tank Roots bloweris a positive displacement blower with forced gas transmission characteristics.，usually used in water treatment, Food and beverage processing, petrify, Textile light textile, petrify and other fields，it is an ideal choice for customers to buy Single tank Roots blower。

1、Brief introduction of Single tank Roots blower

Single tank Roots bloweris a positive displacement blower.。

Single tank Roots blower

2、Single tank Roots blower video detail

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Single tank Roots blowert operation, and helps customers to deeply understand the Single tank Roots blower production process and production site, and gain favorable comments and recognition from customers.。

Single tank Roots blower

As you can see from the live video.，hyde the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

3、Structural advantages of Single tank Roots blower

The Single tank Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Single tank Roots blower enters and exits.

3. impeller

It is the rotating part of the Single tank Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Single tank Roots blower has gradually replaced the two-leaf Single tank Roots blower.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Single tank Roots blower

4、On-site real shot of Single tank Roots blower

Various combinations of Single tank Roots blower can meet the diverse needs of customers. The following are High definition real shot andthe product looks atmospheric., which are trustworthy.。

Single tank Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Single tank Roots blower introduction video

You can buy Single tank Roots blower according to your needs and show you product videos.。

Single tank Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Single tank Roots blower perform well in many situations where stable airflow is needed.、Because of the design of three-blade rotor, the Single tank Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Single tank Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.。

Single tank Roots blowerfeatures include strong adaptability, low noise, convenient maintenance, wide application range and energy-efficient，it is widely used in power, manufacturing industry, Environmental protection industry, building materials and pneumatic transport。